China HITACHI RAM BUSHING 70 X 75 X 30MM HEIGHT | Tonkee®

Outer Diameter (OD): 70mm - This measurement represents the maximum width of the bushing when measured from one side to the other.

It indicates the size of the outermost ring of the bushing.

Inner Diameter (ID): 75mm - The inner diameter signifies the width of the opening within the bushing. This dimension is essential as it determines the size of the shaft or piston that will fit inside the bushing.

Height: 30mm - The height, sometimes referred to as the length or thickness, indicates how deep the bushing extends. It represents the distance from one side of the bushing to the other, perpendicular to both the inner and outer diameters.

While these dimensions provide a basic understanding of the bushing's size, there are additional specifications that might be crucial for selecting the right bushing for a specific application:

Material: Bushings can be made from various materials, such as bronze, steel, or composite materials, depending on the intended use.

The choice of material affects factors like durability and resistance to wear.

Lubrication: Some bushings require lubrication to reduce friction and heat generated during operation. Others may be self-lubricating or designed to work in dry conditions.

Load Capacity: The bushing's load-bearing capacity is essential, as it determines how much force it can withstand without failing or wearing prematurely.

Tolerances: Tight tolerances ensure a proper fit between the bushing and the piston or shaft, minimizing play and vibration.

Previous:Hot sale MTG STARMET 15 BUCKET TOOTH PIN AND RETAINER | Tonkee®

Next:Shop HITACHI RAM BUSHING 95 X 100 X 40MM HEIGHT | Tonkee®